Wife's 05 Equinox gave us a mil light, t/c light, and lo engine power light this past Saturday. After pulling codes p2125, p1125, p0700 and p1791, checker that the one common item was acc pedal. After changing the pedal assy (a pita) car started and ran fine. She drove it to work today it ran fine. she got in it to come home after work, same lights plus the abs and brake lights came on too. Cleared the codes (same ones again) car started and ran ok, but still had abs and brake lights on. the only unusual thing I found was the sound deadening on the panel under the dash was damp. Anyone have any thoughts on a solution?
MIL Light, Traction control light, Brake light, ABS light
- Thread starter rlrnr53
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Problem solved. After replacing the acc pedal, codes went away, for 1 trip. After talking to a friend at the local dealer, he ran the codes that were set and printed out the TSBs for me. It turned out to be a wiring connector behind the left kick panel. Cleaning the corrosion out of the connector and liberal application of dielectric grease, the problems cleared. its been about 2 weeks and so far, so good.
dietz4ibanez
Admin
That's awesome! Glad you posted a update and a fix!
Merry Christmas!
Merry Christmas!
