dadzilla15
New member
- Joined
- Sep 5, 2022
- Messages
- 5
- Reaction score
- 0
2010 Equinox 2.4 Ecotec 120,00 miles
MIL came on and scanned P0016 and P0017 codes, checked and changed oil. No fix, same codes
Replaced intake and exhaust VVT solenoids. No fix, same codes
Found timing chain guide broken so I installed new timing chain kit. No fix, same codes
Replaced crankshaft sensor. No fix, same codes
Removed camshaft phasers disassembled and cleaned. No fix, same codes PLUS P228D
Freeze frame data shows Fuel pressure (Gauge) at 60.5 PSI
Fuel Rail Pressure at 2378 PSI
Code trips at idle.
Any help would be greatly appreciated, what am I missing?
MIL came on and scanned P0016 and P0017 codes, checked and changed oil. No fix, same codes
Replaced intake and exhaust VVT solenoids. No fix, same codes
Found timing chain guide broken so I installed new timing chain kit. No fix, same codes
Replaced crankshaft sensor. No fix, same codes
Removed camshaft phasers disassembled and cleaned. No fix, same codes PLUS P228D
Freeze frame data shows Fuel pressure (Gauge) at 60.5 PSI
Fuel Rail Pressure at 2378 PSI
Code trips at idle.
Any help would be greatly appreciated, what am I missing?
Last edited: