oleg1981
New member
on my NOX i ahve to lamps burned on AC module. one lamp that eluminates the temperature regulator and another position of blower. to take module out you need:
1. deasamble center console
2. remove module from center console panel, to do that you have to unscrew 4 screws.
3. take uppart the module and take out PCB board.
and now the fun part! the bulbs are soldered to PCB board.
what i found on internet i need 12V Microlamps 60mA. Radioshack is selling them. i both 2 of them in local shop. for 4$.
on Monday i will solder it at work. because i don't have solder at home. kinda funny. im working in electronic factory but dose not have an tools at home
To be continued........
1. deasamble center console
2. remove module from center console panel, to do that you have to unscrew 4 screws.
3. take uppart the module and take out PCB board.
and now the fun part! the bulbs are soldered to PCB board.
what i found on internet i need 12V Microlamps 60mA. Radioshack is selling them. i both 2 of them in local shop. for 4$.
on Monday i will solder it at work. because i don't have solder at home. kinda funny. im working in electronic factory but dose not have an tools at home
To be continued........