TexasAggie
New member
- Joined
- Apr 21, 2014
- Messages
- 3
- Reaction score
- 0
I have a 2010 Equinox and have loved it.
However, I now have a freon leak at the condenser connection on one of the lines going into the bottom of the dryer. The lines are on the bottom right looking away from the car.
I can't tell clearly, but are the lines brazed/soldered into the condenser or is it connected some other way? The leak is at the tube to condenser connection on the top most line of the two lines.
I am trying to figure out if I need to replace the whole condenser or replace an o-ring.
Thanks in advance for your help.
However, I now have a freon leak at the condenser connection on one of the lines going into the bottom of the dryer. The lines are on the bottom right looking away from the car.
I can't tell clearly, but are the lines brazed/soldered into the condenser or is it connected some other way? The leak is at the tube to condenser connection on the top most line of the two lines.
I am trying to figure out if I need to replace the whole condenser or replace an o-ring.
Thanks in advance for your help.
