Reply to thread

Message: <blockquote data-quote="fciac" data-source="post: 24652" data-attributes="member: 9103">This is the cable connecting my camera to the wiring harness. I'm unable to find a wiring schematic that would identify the trigger wire. Once I identify this wire my plan is to run power from the fuse box through a toggle switch (which i will located near the driver seat) and then to this connection point. The toggle sw will give me the flexibility to either have the backup camera operate as normal, or I'll be able to force it on no matter what gear is selected. So, if anyone has any suggestions on where i can find a schematic it would be appreciated.Again this is for the rear camera on a 2020 LT.[ATTACH=full]2752[/ATTACH]</blockquote>