Reply to thread

Message: <blockquote data-quote="PoManNox" data-source="post: 31924" data-attributes="member: 8300"><p>I removed the actuators and used a torx bit to thread the pistons in on my 2021 Equinox when I did the pads and rotors all the way around on it a few months ago.   I didn't even unplug the electrical connectors to the actuators.  I left everything plugged in.   I did have to tweak the hard lines a bit on the rear calipers to be able to gain access to some of the torx screws on the actuators.  No big deal.  Just a slight reposition.</p></blockquote><p></p>