Recent content by maxpg

  1. M

    Newbie with timing issue

    Hello, thank you for the photos, I got mine assembled back again, with the both new Cam phasers, all the marks are like on your pictures. Still had camshaft position error codes all over and the engine shut itself off when rev more than 1000 RPM. Codes were P0340, P0097, P0014, P0113. ECM reset...
  2. M

    Newbie with timing issue

    Thanks for sharing. I encountered a similar issue after replacing the timing chain, P0014 and P0341. I reopened it yesterday, verified the marks, all were correct. The cam phasers appear fine, moving with the shafts, but I decided to order new ones regardless. I also replaced both camshaft...
  3. M

    Newbie with timing issue

    Have you got any luck with that issue?
  4. M

    Timing chain marks question

    Hello, I'm hoping someone can help me with this mystery. It is a 2012 2.4L equinox, it was running smooth while cold and bucking at D on idle when warmed. I opened it up, the timing chain was loose, bought a new set and started to change it according to the manual. First mystery, I have this...
See more
Top