Intake

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1sLoY7

New member
Joined
May 22, 2012
Messages
74
Reaction score
0
Location
South Louisiana
Anyone running other than a stock intake filter or whole intake system? I have got a drop in K&N on the Sport and will be fabbing a new intake tube along with ram air into the stock air box. Putting the drop in filter was a night and day difference with the 3.6. I am now looking at a dry flow by AEM. So I think after a few miles on the K&N I will do the switch to see who is better.
 

1sLoY7

New member
Joined
May 22, 2012
Messages
74
Reaction score
0
Location
South Louisiana
I will also be doing a retune with HPTuners after a few mods. I am not looking for the power but more on fuel economy.
 

prheaume

New member
Joined
Nov 3, 2011
Messages
572
Reaction score
0
Location
Sherbrooke,Qc
Keep us updated on how it goes! I've always put that on standard transmission vehicule because of the need to get a higher RPM to get all the potential and the nice sound of that, I'm a little bit affraid on an automatic vehicule, personally I will always be on the kickdown lol
 

BLKTorrent

New member
Joined
Mar 22, 2012
Messages
4
Reaction score
0
Location
Minnesota
I will also be doing a retune with HPTuners after a few mods. I am not looking for the power but more on fuel economy.

How are you able to tune it with HPTuners? I didn't think they had the support for these motors/ECM's.

I have a Torrent GXP with the LY7 3.6 with the Bosch E77 ECM and they don't plan on doing anything with the Bosch ECM's anytime soon.


Dream Workz Auto Detailing using Tapatalk
 

2010BlkGraniteNox

New member
Joined
Jul 8, 2010
Messages
398
Reaction score
0
Location
Viera, FL
How are you able to tune it with HPTuners? I didn't think they had the support for these motors/ECM's.

I have a Torrent GXP with the LY7 3.6 with the Bosch E77 ECM and they don't plan on doing anything with the Bosch ECM's anytime soon.


Dream Workz Auto Detailing using Tapatalk

HPTuners does not have support for the ECM

You can go to Vince @ Trifecta if you want tuned though. He is one of the few that has been able to crack most of the GM ECM's, and I know for certain does offer a LY7 3.6 Tune
 

BiggieGTO

New member
Joined
Jul 6, 2012
Messages
7
Reaction score
0
Location
Az
So..... I made mention of this question in a different thread. After searching on-line I cannot find anyone that makes an aftermarket programmer for them?
 

1sLoY7

New member
Joined
May 22, 2012
Messages
74
Reaction score
0
Location
South Louisiana
My buddy that would do the tuning said that he can get the license with HPTuners. I questioned him if he was sure and he said he could since he was a beta tester for them. I guess I should tell him to call em up.
 

Members online

No members online now.
Top