View Single Post
Old 06-20-2017, 03:48 PM   #3 (permalink)
Willcruz82
Junior Member
 
Join Date: Jun 2017
Age: 37
Posts: 4
Rep Power: 0
Willcruz82 is on a distinguished road
Default

OK... So, today I got the Center support bearing and the U-joint next to the support bearing all switched out. The heavy vibration and rumble strip noise is GONE. the support bearing was thrashed. I got the drive shaft off no problem but to remove the joint and the bearing was a B*tch so I brought it to the garage and the removed the old ones and mounted the new ones for $60. There is still a very small vibration so I am thinking that since i bolted up the support bearing before bolting up the front drive shaft that the support bearing may just need to be loosened and then adjusted and re-tightened. However, the main problem is gone. hopefully a few twists here and there will fix the rest. I will report back.
Willcruz82 is offline   Reply With Quote